Finished Board design for Pi and Teensy Controller

Ok.  I've finished my board design I've been working on.  This board will provide the following features:

1. Interface from Teensy 3.1 to Pi (I2C) from Codesys
2. Adafruit 10 DOF IMU
3. RS485 Serial Connection
4. Pluggable Terminals
5. 24V isolated digital inputs
6. 24V isolated digital outputs
7. 4 ch analog inputs, buffered
8. 4 ch analog outputs, buffered
9. Real time Clock

So far, all the circuits should work, so I'm going to send the board off to be made.

Back with more later..